Valves and Flowline Products

Gate Valve is a bi-directional shut-off device to open and close the flow of the fluid conveyed by the pipeline. They are well suited for high pressure and high temperatures, and can be used for a wide variety of fluid. A wide choice of shell and trim materials do cover the whole range of applications, from the every-day type of non-corrosive service to critical service with highly aggressive media.

Globe valves are generally characterized for their spherical body with the two halves of the body being separated by an internal baffle.

This has an opening that forms a seat onto which the disc, connected to a stem, can be screwed in (if operated manually) or slid in (if automated) to close the valve.

Swing check valve rocker and valve connection connected using a spherical structure, so that the valve is in the range of 360 degrees have a certain degree of freedom, there has appropriate trace position compensation.

Wafer check valve is automatic, in a direction under the action of the fluid pressure, the valve flap open, the reverse flow of fluid by the fluid pressure and the valve flap valve self-acting on the valve seat, which cut off the flow.

Trunnion mounted ball valve is a new generation of high-performance ball valve, suitable for long distance pipelines and general industrial pipelines. Designation takes full consideration to its strength, safety, resistant to harsh environments, so it can apply to a variety of corrosive and non-corrosive media.

High Performance Valve delivers the highest quality and highest value available for meeting today’s demanding requirements.

Available with proven bi-directional fire safe seats for reliable control of flammable and hazardous fluids in petroleum, petrochemical, chemical and other high-risk applications.

2pc flanged ball valve is full bore designed and suitable for shutoff of various medium without much dirt such as air, gas, water, oil and liquids.

A range of 3-piece ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range.

Available in figures 100 to 2202 and come in 1 to 16 inches sizes up to 20,000 psi CWP. We offer 13 figures, allowing applications for a variety of applications. Sour gas models available in figures 100 to 2202 and come in 1 to 16 inches sizes up to 20,000 psi CWP.

Contact us for special or customization hammer union and crossover.

Metal Bellows Expansion Joints are often used to compensate for thermal expansion of hot piping systems. They are designed to alleviate piping stress, noise and vibration. Stainless steel expansion joints also permit axial compression, elongation, lateral and angular movement. Marine classification type approved model are available upon request.

Rubber & PTFE Expansion Joints are often used in piping systems under 200F. Our expansion joints come in diameter from 1” to 120” and be with any type of elastomer material. It has excellent ability to isolate sound and vibration and is easy to be installed on piping due to its soft and flexible material. Available in Single, Double and Triple arch models. Non standard designs can be manufactured as required. Marine classification type approved model are available upon request.

Stockist for a variety of flange, fitting, and valve types that range in nominal sizes from ½” up to 72″ and weight classes that range from 150# (lbs.) to 2,500# (lbs.). We offer both domestic and imported grades of material to give you options when budgeting your respective project.

Pipe from 1/4″ to 36″ diameter, from schedule 10 to XXS, in all grades of material Plug, ball, gate, globe, check, and butterfly valves in all grades of material.

We specialize in metric and hard to find items Orifice flanges with plates if needed RTJ (Ring Type Joint) facing Reducing flanges with hubs
API, MSS, AWWA
Spectacle blinds
Long weld neck flanges
Metric flanges and spacers
Large OD (Outside Diameter) flanges
Plate flanges
Standard slip-on, blind, weld neck, socket weld, threaded,
and lap joint flanges.

Metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles. Our ring gaskets are in accordance with specific tolerances on CNC machines and also fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable). Monogrammed Ring Joint Gaskets as per API- 6A are also available.

Ring Joint Gaskets are precision machined, metal gaskets suitable for high pressure and high temperature applications. They are manufactured in strict accordance with API 6A, API 17D, and ASME B16.20. These high pressure gaskets come in a variety of types, sizes, and material combinations.